DRAKE R8B Owner's Manual Page 39

  • Download
  • Add to my manuals
  • Print
  • Page
    / 43
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 38
37 Quick Reference Guide
Dim Lamp (10,29)
Disable Beep (10)
MEMORY FUNCTIONS
Program Memory Channel (page 21)
Recall Memory Channel (page 21)
Recall Memory Tune Channel (page 21)
Move Memory to VFO (page 21)
Lock Memory Channel (page 21)
Delete Memory Channel (page 21)
Select VFO & mode, adjust frequency & bandwidth.
Press
V M
(MEM will flash),
3
use keypad to enter 3 digit memory
channel number. Use the Tuning Wheel to enter character at each
location for NAME. Press
to advance cursor and press to
backspace. Press
V M
to exit.
Press
MEM
use keypad to enter channel number, or use or the
tuning wheel.
Press
MEM
(hold until MEM TUNE is displayed). Use keypad or .
Use tuning wheel to change frequency.
Press
M V
M/KHz
. Will move memory contents to last used VFO.
Select memory channel to be locked,
F
3
press LOCK.
Select memory channel to be deleted. Press
F
3
press
DEL
0
(hold until 2nd beep).
SCAN MODES
All SCAN modes require selecting one of three SCAN METHODS. Select desired SCAN MODE and then select 'SEEK',
'TIME' or 'CARRIER'.
Scan Memory (page 22)
Scan List (page23)
Scan Multiple Lists (page 23)
Scan A - B (page24)
Other Controls Used in Scan Mode.
Passband Offset
Squelch/RF
Adjust for optimum reception.
Set squelch counterclockwise. Adjust RF (gain) counterclockwise until S-meter
indicates desired signal level to trip squelch. Advance the Squelch control
clockwise until the audio just quiets. Advance the RF (gain) fully clockwise.
Press
F
3
press
MEM
1
then select method,
Press
F
3
press
SEEK
4
or press
F
3
press
TIME
5
or
Press
F
3
press
CARR
6
. Press
SCAN
.
Press
F
3
press
SCAN
LIST
2
then select method,
Press
F
3
press
SEEK
4
or press
F
3
press
TIME
5
or
Press
F
3
press
CARR
6
. Press
SCAN
.
Press
F
3
press
SCAN
LIST
2
, Enter number, to enter additional
number,
to review list. Select method. Press
SCAN
.
Press
F
3
press
SEEK
4
or press
F
3
press
TIME
5
or
Press
F
3
press
CARR
6
or press
SCAN
.
Press
F
3
press
A - B
3
, Enter one endpoint frequency.
Press or , Enter second endpoint frequency.
Press
SCAN
.
Press
F
3
press
LAMP
8
Press until dial lighting is at desired level.
Press
F
3
press
BEEP
9
to enable or disable beep.
Page view 38
1 2 ... 34 35 36 37 38 39 40 41 42 43

Comments to this Manuals

No comments