DRAKE R8B Owner's Manual download pdf (Page 38)

Quick Reference Guide 36

Press VFO function button until desired VFO is enclosed in box.

Select VFO function button. Use numeric keypad,

, or

tuning wheel.

Press PRE ATTN function button until

PRE

ATTN

is enclosed in box.

Press AGC function button until desired AGC action is enclosed in

box.

Press NB function button until desired noise blanker mode is dis-

played.

Press BANDWIDTH buttons to select appropriate filter.

Press MODE buttons to select appropriate mode.

Press AM/SYNC button to activate or deactivate the Synchronous

detector.

Press and hold TIMER function button until ON annunciator turns on

and flashes. Use keypad to to enter On time for Timer 1. Press TIMER

function button again. Use keypad to enter Off time for Timer 1.

Press TIMER function button again. Use keypad to enter ON time for

Timer 2. Press TIMER function button again. Use keypad to enter Off

time for Timer 2. Press TIMER function button again to exit set mode.

Press TIMER function button, enter 1 and/or 2.

Press CLK/FREQ function button to display time or frequency read-

out.

Select VFO (page 16)

Adjust Frequency (page16)

Preamp or Attenuator (page 17)

Select AGC (page 12)

Activate Noise Blanker (page 12, 18)

Select Bandwidth (page 9)

Select Mode (page 9)

Select Synchro (page 9)

Set TIMER On/Off times (page 25, 26, 27)

Activate TIMER (page 26)

Select CLOCK/FREQUENCY Display (page 9, 12)

Most front panel pushbuttons perform two functions. The second function requires that the

button be

pressed first, and then the desired 2nd function button pressed within 3 seconds. The symbol

indicates that

button is to be pressed within 3 seconds.

Press

press VFO function button until display

shows VFO A = B.

Press

, ANT function button until desired antenna is enclosed in

box. Note: VHF is only accessible if the optional VHF converter

module is installed.

Press

press NAME function button until display shows NAME.

Press

press NOTCH function button, use NOTCH control to

adjust for desired results.

Press

press STEP function button. Frequency display will

adjust accordingly.

Press

press LOCK function button. Must be in VFO mode.

Pushbuttons are inactive.

Press

press

CLK

(hold until colon flashes). Use keypad to

enter either L (local) or U (alternate) time in HH:MM:SS format. Press

to start clock.

Press

press

CLK

(press

CLK

again within 3

seconds to display alternate time). Press CLK/FREQ function button to

display current selected time.

Set VFO A=VFO B (page11)

Select Antenna (page 11, 15)

Activate NAME (page 12, 21)

Activate Notch (page 11)

Adjust Step Size (page 9, 12, 16)

Lock Controls (page 12, 17)

Set Time (page 25)

Display Time (page 25)

1 2 ... 33 34 35 36 37 38 39 40 41 42 43

Comments to this Manuals

No comments

DRAKE R8B Owner's Manual Page 38

Comments to this Manuals

Related products and manuals for Receiver DRAKE R8B