Instruction Manualwith Closed Captioningis a registered trademark of the R.L. Drake Holdings LLC© Copyright 2013 R.L. Drake Holdings LLC P/N: 65122820
10Setup and Programming (continued)BRIGHTNESS, CONTRAST, SATURATION and HUE: These menu items allow the user to assign the Brightness, Contrast, and S
11Setup and Programming (continued)MINOR CHANNEL: This menu allows the user to determine the minor channel number on which the encoded audio and video
12OPERATING INSTRUCTIONS – FROM THE FRONT-PANEL1) Connect video and audio inputs to the appropriate rearpanel input connections.2) Connect the output
13Click on the desired value for that parameter. The value list will then disappear and the new value will appear in the window for that parameter.8)
14Additional InformationSTANDBY MODERF output. This can be used when it is desirable to temporarily disable the output without unplugging the external
15CATV CHANNEL FREQUENCIESTable 1: CATV
16CATV CHANNEL FREQUENCIES
17Service / If You Need To Call For HelpSERVICE INFORMATIONYou may contact the R.L. DRAKE Service Department for additional information or assistance
18If You Need To Call For Help (continued)If the unit is out of warranty, use one of the following methods for return shipment:1) You designate billin
19Three Year Limited WarrantyR.L. DRAKE HOLDINGS LLC warrants to the original purchaser this product shall be free from defects in material or workman
2CAUTION STATEMENTS ...
R.L. Drake Holdings LLC710 Pleasant Valley Drive Springboro, Ohio 45066. USACustomer Service and Parts Telephone: +1 (937) 746-6990Telefax: +1 (93
3Important Safety Instructions (continued)8. Accessories: Do not place this product on an unstable cart, stand, tripod, bracket, or table. The produc
4INPUTVideo: VGA (with pass-through to monitor),HDMI (unencrypted), Component (Y-Cr-Cb), Composite via Y input for 480iResolution: 480i, 480p, 720p, 1
5General DescriptionThe Drake model DSE24 is a High Definition or Standard Definition MPEG2 video and audio encoder combined with a QAM modulator and
6Installation and Mounting / Front Panel ControlsINSTALLATION AND MOUNTING NOTESThis equipment is designed to be installed either as a table top unit
7R1, RF OUTPUT - This type “F” connector is the high level (+29.5 dBmV to +45 dBmV), 5 to 1002 MHz, output from the DSE24 RF output section.R2, DC POW
8Software Flow Chart
9Setup and ProgrammingProgramming and viewing of the various setup and operating parameters is accomplished using the front panel back lit, two line,
Comments to this Manuals