DRAKE SW 1 Owner's Manual download pdf (Page 2)

2 Important Safeguards

WARNING:

TO REDUCE THE RISK OF ELECTRIC

SHOCK,

DO NOT REMOVE COVER OF AC ADAPTOR

NO USER-SERVICABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED PERSONNEL

RISK OF ELECTRIC SHOCK

DO NOT OPEN

¡WARNING!

An appliance and cart combination should be moved with care. Quick stops,

excessive force and uneven surfaces may cause the appliance and cart combina-

tion to overturn.

The lightning flash with arrow head symbol, within an equilateral triangle, is

intended to alert the user to the presence of uninsulated "dangerous voltage"

within the product's enclosure that may be of sufficient magnitude to constitute a

risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to

the presence of important operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS PRODUCT'S AC ADAPTOR TO RAIN OR

MOISTURE. DO NOT OPEN THE CABINET, REFER SERVICING

TO QUALIFIED PERSONNEL ONLY.

WARNING:

TO PREVENT ELECTRIC SHOCK, DO NOT USE THE AC

ADAPTOR WITH AN EXTENSION CORD RECEPTACLE OR OTHER

OUTLET UNLESS THE BLADES OF THE AC ADAPTOR CAN BE

FULLY INSERTED TO PREVENT BLADE EXPOSURE.

CAUTION:

POUR PREVENIR LES CHOCS ELECTRIQUES, NE PAS

UTILISER CETTE FICHE POLARISEE AVEC UN

PROLONGATEUR, UNE PRISE DE COURANT OU UNE AUTRE

SORTIE DE COURANT, SAUF SI LES LAMES PEUVENT

ETRE INSEREES A FOND SANS EN LAISSER AUCUNE

PARTIE A DECOUVERT.

ATTENTION:

15. Damage Requiring Service—Unplug this product from the wall outlet and refer servicing to

qualified service personnel under the following conditions:

a. When the AC adaptor cord or plug is damaged.

b. If the AC adaptor has been exposed to rain or water.

c. If the product does not operate normally by following the operating instructions. Adjust only

those controls that are covered by the operating instructions. An improper adjustment may result

in damage and will often require extensive work by a qualified technician to restore the product to

its normal operation.

d. If the product has been dropped or the cabinet has been damaged.

e. When the product exhibits a distinct change in performance—this indicates a need for service.

16. Replacement Parts—When replacement parts are required, be sure the service technician

has used replacement parts specified by the manufacturer or have the same characteristics as the

original parts. Unauthorized substitutes may result in fire, electric shock or other hazards.

17. Safety Check—Upon completion of any service or repairs to this product, ask the service

technician to perform safety checks to determine that the product is in proper operating condition.

18. Outdoor Antenna Grounding—Before attempting to install this product, be sure the antenna

or cable system is grounded so as to provide some protection against voltage surges and built-

up static charges.

a. Use No.10 AWG (5.3mm

) copper, No.8 AWG (8.4mm

) aluminum, No.17 AWG (1.0mm

)

copper-clad steel or bronze wire or larger, as ground wire.

b. Secure antenna lead-in and ground wires to house with stand-off insulators spaced from 4 feet

(1.22m) to 6 feet (1.83m) apart.

c. Mount antenna discharge unit as close as possible to where lead-in enters house.

d. A driven rod may be used as the grounding electrode where other types of electrode systems

do not exist. Refer to the National Electrical Code, ANSI/NFPA 70-1990 for information.

e. Use jumper wire not smaller than No.6 AWG 13.3mm

) copper or equivalent, when a separate

antenna grounding electrode is used.

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

ELECTRIC

SERVICE

EQUIPMENT

GROUND CLAMP

ANTENNA

LEAD IN

WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING

CONDUCTORS

(NEC SECTION 810-21)

EXAMPLE OF ANTENNA GROUNDING

1. Read Instructions—All the safety and operating instructions should be read before the

appliance is operated.

2. Retain Instructions—The safety and operating instructions should be retained for future

reference.

3. Heed Warnings—All warnings on the appliance should be adhered to.

4. Follow Instructions—All operating and use instructions should be followed.

5. Cleaning—Unplug this appliance from the wall outlet before cleaning. Do not use liquid

cleaners or aerosol cleansers. Use a damp cloth for cleaning.

6. Do Not Use Attachments—not recommended by the manufacturer or they may cause

hazards.

7. Water and Moisture—Do not use this product near water—for example, near a bathtub,

wash bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool—and the like.

8. Accessories—Do not place this product on an unstable cart, stand, tripod, bracket, or table.

The product may fall, causing serious injury to a child or adult, and serious damage to the

appliance.

9. Ventilation—This product should never be placed near or over a radiator or heat register.

This product should not be placed in a built-in installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer’s instructions have been adhered to. Any

slots or openings in the cabinet are provided for ventilation. To ensure reliable operation of the

product and to protect it from overheating, these openings must not be blocked or covered. The

openings should never be blocked by placing the product on a bed, sofa, rug, or other similar

surface. KEEP CURTAINS AND OTHER FLAMMABLE MATERIALS OUT OF DIRECT

CONTACT WITH THE AC ADAPTOR.

10. Power Sources—This product should be operated only from the type of power source

indicated on the marking label of the supplied AC Adaptor. If you are not sure of the type of

power supplied to your home, consult your appliance dealer or local power company.

11. Lightning—For added protection for this product during a lightning storm, or when it is left

unattended and unused for long periods of time, unplug the AC adaptor from the wall outlet.

12. Power Lines—An outside antenna system should not be located in the vicinity of overhead

power lines, other electric light or power circuits, where it can fall into such power lines or

circuits. When installing an outside antenna system, extreme care should be taken to keep from

touching such power lines or circuits as contact with them may be fatal.

13. Overloading—Do not overload wall outlets and extension cords as this can result in a risk

of fire or electric shock.

14. Servicing—Do not attempt to service this product yourself as opening or removing covers may

expose you to dangerous voltage or other hazards. Refer all servicing to qualified service

personnel.

WARNING: TO PREVENT FIRE OR

ELECTRICAL SHOCK DO NOT EXPOSE

THIS PRODUCT'S AC ADAPTOR TO RAIN OR MOISTURE

1 2 3 4 5 6 7 ... 11 12

Comments to this Manuals

No comments

DRAKE SW 1 Owner's Manual Page 2

Comments to this Manuals

Related products and manuals for Receiver DRAKE SW 1