DRAKE R-4A Specifications Page 18

  • Download
  • Add to my manuals
  • Print
  • Page
    / 39
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 17
I. Accessory Frequency Coverage
In addition to reception on 80, 40, 20, 15, and the 28.5
-
29.0 portion
of 10 meters, the R-4A can be programed to receive any ten 500 KC-wide
ranges between 1.5 and 30.0 mc (excluding 5.0 to 6 .O mc) by inserting
the appropriate crystal in one of the ten accessory crystal sockets.
These sockets face out the rear of the unit on the left side of the chassis.
In order to determine the correct crystal frequency, simply add 11.1 to the
lowest frequency of the 500 KC range to be covered. For example; assume
you wanted to receive 1.5 to 2.0 M
C for reception of the 160 meter amateur
band. The crystal frequency would be the lowest frequency of the de-
sired range (1.5 M
C) plus 11.1 which would equal 12.6 MC. This crystal
can then be inserted in any one of the ten accessory crystal sockets
provided.
IMPORTANT: Only series resonant crystals should be used. Accessory
crystals may be ordered direct from the R.L. DRAKE COMPANY for $5.00
)
each. When ordering,
be sure to specify that the crystals you desire are
for accessory frequency operation in the R-4A.
In order for the desired band to be received,the
XTAL
Switch must be turnea
to the number corresponding to the crystal socket in which the crystal in
question is inserted.
The lowest frequency of the range made available
may then be written in the range window with pencil for future reference.
If crystals are changed you may erase the previously inscribed numbers
easily.
The BAND switch must now be turned to a position which will allow the
PRESELECTOR to tune the desired range.
Recommended ranges are as
follows:
BAND
PRESELECTOR TUNING RANGE (MC)
1.5-3.0 1.5
-
3.0
3.5 3.0
-
5.0
7.0 6.0-10.0
14.0 10.0-16.0
21.0 16.0-23.0
28.5 23.0-30.0
In our example,the BAND switch should be placed in the 1.5 position and the
preselector should be peaked on the 160 meter portion of its scale.
A chart showing the preselector frequency vs. log scale setting for each
Band switch position is shown on page 19.
-17-
Page view 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 38 39

Comments to this Manuals

No comments